Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight of a Husqvarna 701

Model: Husqvarna 701 Sm
Part: Light bulb

Video tutorial

To remove the front headlight of a Husqvarna 701, loosen the four Torx screws (T30) located on either side of the headlight, between the front fork and the plastic cover. Once the screws are loosened, you can slide off the front plastic cover to which the headlight is attached, containing the bulbs.

Disconnect the connector and pull out the old bulb from its housing. Then, insert the new bulb into the designated slot and reconnect the connector.

Finally, reassemble the entire headlight and the plastic cover.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight on a Husqvarna 701?
How to Replace the Front Headlight on a Husqvarna 701?
701 Sm To replace the front headlight on a Husqvarna 701, first loosen the screws that secure the front fairing laterally. Once the screws are loosened, you…
How to Replace the Spark Plugs on a Husqvarna 701?
How to Replace the Spark Plugs on a Husqvarna 701?
701 Sm The Husqvarna 701 has two spark plugs: one located at the top and one at the bottom, both in a fairly accessible position, as indicated in the video.…
How to Replace the Fuel Filter on a Husqvarna 701
How to Replace the Fuel Filter on a Husqvarna 701
701 Sm To replace the fuel filter on the Husqvarna 701, loosen the fuel pump plate located at the bottom of the rear mudguard. Once loosened, collect the fu…

How to Replace the Stator on the Triumph Daytona 675?

To replace the stator on the Triumph Daytona 675, loosen the screws that secure the cover located on the left side of the bike: once these screws have been removed, detach the cover and access the underlying stator. The stator can be removed from its housing by unscrewing the central screws that secure it: this way, you can insert a new stator into its housing, re-inserting the side starter motor. Once these components have been reinserted, close everything with the cover.

Watch the video!


by ScegliAuto

More videos