Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you adjust the valves of the Beta RR 125?

Model: Beta Rr 125
Part: Valve

Video tutorial

In order to adjust the valves of the Beta RR 125, you need to completely remove the valve cover located on the top of the engine block: by loosening these screws, it will be possible to proceed by removing the cover and identifying the valves underneath.

These will need to be adjusted following the values ??reported in the car's user and maintenance manual: to insert these values, it will be necessary to use a feeler gauge.

Once the valve adjustment is done, it will be possible to close the engine by inserting the corresponding valve cover.


Posted on 23 July 2025 by ScegliAuto


Related tutorials

How to Start a Beta RR 125
Rr 125 Begin by sitting on the rider's seat of your Beta RR 125. Next, insert the key into the ignition switch and turn it to activate the instrument panel.…
How to Replace the Exhaust on the Beta RR 125?
How to Replace the Exhaust on the Beta RR 125?
Rr 125 To replace the exhaust on the Beta RR 125, loosen the screws securing the side cover panel located near the rear mudguard: once the screws are loosen…
How to Replace the Exhaust on the Beta RR 125?
How to Replace the Exhaust on the Beta RR 125?
Rr 125 To replace the exhaust on the Beta RR 125, loosen the bolts securing the exhaust end can to its mounting located on the right side of the bike, near …

How to Replace the Front Headlamp on a Royal Enfield Classic?

In this tutorial, you can see how to replace the front headlamp on a Royal Enfield Classic, a very simple and quick operation. First, ensure that the key is not inserted, then locate the screw on the top of the headlamp and unscrew it with a cross-head screwdriver. Next, separate the headlamp from the base, disconnect the power connector, and remove the large rubber cap. At this point, you can unclip the metal clip, transfer the bulb to the replacement, and install it by following the exact reverse procedure.

Watch the video!


by ScegliAuto

More videos