Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Beta
  4. : Trial 250
Before starting, position your Beta 250 Trial vertically. To drain the gear oil more effectively, it is advisable to run the bike for a few minutes. Begin by loosening and removing the lower oil drain bolt, allowing the gear oil to flow out. After that, re-tighten the drain bolt. Next, unscrew the upper filler cap. At this point, using a funnel, insert the new gear oil, and you will have successfully completed the replacement.

Updated on 12 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Beta 50 This guide will show you how to change the transmission oil on a Beta 50 RR, following the instructions below. First, place the bike on a stand and w…
Beta 430 In this video tutorial, you will learn how to replace the gearbox oil on various Beta 4-stroke models, particularly the 430, 500, and 350. First, rem…
Beta 125 Rr Discover in this video how to change the gear and clutch oil on the Beta 125 RR 2-stroke enduro bike, as well as on the 200 and 50 models. First, rem…

How to Replace the Headlamp of the Triumph Street Triple 765R?

To replace the headlamp of the Triumph Street Triple 765R, you need to loosen all the screws that secure the headlight unit to its housing: these screws are located on the inner part of the dashboard and on the two side sections of the corresponding headlamp. Once the screws have been loosened, you can pull the headlamp out from its housing and disconnect the connectors attached inside; this way, the old headlight unit can be completely removed and replaced with the new one. The new unit must then be secured and connected properly.

Watch the video!


by ScegliAuto

More videos