Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta 390 Rrs
Part: Engine oil

Start the engine for a few minutes to warm the oil, making it more liquid and easier to drain. As shown in the video, unscrew the three lower screws that secure the protection under the engine oil compartment. At this point, you can also unscrew the bolt that acts as a plug for the lower drain hole. Collect the used oil in a container and dispose of it properly. Meanwhile, unscrew the oil filter cap, remove the filter with pliers, and insert the new piece after lubricating its O-ring. Close the drain hole by tightening the bolt, replace the cover, and fill with new lubricant through the fill hole.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Fuel Tank from a Beta 390 RRS
Removing the Fuel Tank from a Beta 390 RRS
390 Rrs Today, we will see how to remove the fuel tank from a Beta 390 RRS. First, remove the seat and then unscrew the side screws of the tank; next, take o…
How to replace the exhaust on the Beta 390 RRS?
How to replace the exhaust on the Beta 390 RRS?
390 Rrs To replace the exhaust on the Beta 390 RRS, you need to loosen the screws that secure it to its housing on the right side of the bike, near the rear …
How do you replace the exhaust pipe of the Beta 390 RRS?
390 Rrs The replacement of the muffler of the Beta 390 RRS can be done by loosening the screws that fix it to the housing on the right side of the motorcycle…

How to Replace the Air Filter on a Honda XL1000 Varadero?

In this tutorial, you will see how to replace the air filter on a Honda XL1000 Varadero, a very simple operation. First, remove the seat, then unscrew the two rear mounting bolts of the tank, the two front ones, and the remaining ones located on the sides. Once done, close the two fuel taps, disconnect the rubber hose, and lift the tank. At this point, you will have access to the filter box, which can be opened by removing the 8 screws around the perimeter. Once the filter is replaced, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos