|
Do it yourself
| |||
| ||||
Model: Beta 300 Rr
To replace the fork oil on a Beta 300RR, first remove the bolts securing it to the bike, located at the top and corresponding to the wheel. Once the fork is removed, take out the bearing located at the top and consequently the spring underneath. This will allow the old oil to drain out, collecting it in a container. At this point, pour the new oil into the fork, reinsert the spring and bearing; finally, reinstall it on the bike.
Updated on 28 April 2026 by ScegliAuto
Video tutorial
Related tutorials
300 Rr
In order to replace the clutch cylinder of the Beta 300RR, you need to loosen the screws that secure the cover casing located on the left side of the…
300 Rr
It will be possible to replace the grips of the Beta 300RR by first loosening the screws that fix the handguard to its housing: this will be fixed by…
300 Rr
To replace the battery of the Beta 300RR, loosen all the screws on the right and left side that secure the seat to its housing. Once these screws are…
|
How to Perform Routine Maintenance on the Benelli 502C
In this short and simple guide, you will learn how to perform routine maintenance on the Benelli 502C motorcycle. First, place the motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then replace both the engine oil and the oil filter. Next, check the correct tension of the drive chain by adjusting it at the wheel nut; finally, check the brake fluid and coolant levels, and inspect the brake wear! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.030
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
