Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the grips on the Beta 300RR?

Model: Beta 300 Rr
Part:

Video tutorial

It will be possible to replace the grips of the Beta 300RR by first loosening the screws that fix the handguard to its housing: this will be fixed by the screws on the sides of the grip itself. Once the screws have been removed, it will be possible to proceed by removing the handguard and then also removing the corresponding grip: it will now be possible to insert the new one. This last one must be properly fixed and connected to the throttle: in this way it will be possible to verify that everything works correctly.


Posted on 29 June 2025 by ScegliAuto


Related tutorials

How to Replace the Battery of the Beta 300RR?
How to Replace the Battery of the Beta 300RR?
300 Rr To replace the battery of the Beta 300RR, loosen all the screws on the right and left side that secure the seat to its housing. Once these screws are…
How to Replace the Clutch Cylinder on the Beta 300RR?
How to Replace the Clutch Cylinder on the Beta 300RR?
300 Rr To replace the clutch cylinder on the Beta 300RR, first loosen the screws securing the cover plate on the left side of the bike that also covers the …
How to Replace the Spark Plug on a Beta 300RR?
300 Rr To replace the spark plug on a Beta 300RR, loosen the screws securing the seat to its housing and those securing the fuel tank. These two parts can b…

Vespa Immobiliser: How to Transfer the Chip from the Old Key

In the case shown in the video, the new keys are not recognised by the ECU: the Vespa starts but does not run (thus the immobiliser is active). The solution shown in the video involves locating the immobiliser chip in the old key (the one recognised by the ECU). Open the cover on the key (only red master keys or some blue ones), remove the chip (which is a small black cylinder or rectangle), insert it into the new key in place of the new one, and try to start. Now the key will work. If the master key is red, it will definitely work. If it is blue, it might work: you need to cut the silicone; this is possible but a delicate operation. If it is a black clone key, then it is a system that does not work.

Watch the video!


by ScegliAuto

More videos