Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The BMW F750 GS exhaust can be replaced by loosening the screws that hold it to the specific supports located on the right side of the rear fender: once these screws have been removed, it will be possible to loosen the screws that secure the connecting strap between the exhaust and the remaining part of the exhaust pipe. This will allow the exhaust to be completely removed, so that the new replacement piece can be inserted. Once the new exhaust is installed, it will need to be secured with the appropriate screws and the connecting strap reinserted.

Posted on 13 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the BMW F750 GS?
How do you replace the exhaust pipe of the BMW F750 GS?
F750 Gs The replacement of the muffler on the BMW F750 GS is done by loosening the screws that hold it to the specific supports located on the right side of …
How do you replace the muffler of the BMW F750 GS?
How do you replace the muffler of the BMW F750 GS?
F750 Gs To replace the exhaust installed on the BMW F750 GS, you need to loosen the screws that secure it to its housing, located near the rear wheel on the …
How do you replace the exhaust pipe of the BMW F750 GS?
How do you replace the exhaust pipe of the BMW F750 GS?
F750 Gs The exhaust pipe of the BMW F750 GS can be replaced by loosening the bolts that hold it to the specific supports located on the right side of the rea…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos