Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you set the clock on the BMW G310 R?

Model: Bmw G310 Gs
Part: Clock

Video tutorial

The operation of adjusting the clock of the BMW G310 GS is carried out by turning on the instrument panel by turning the key inside its ignition switch: once the latter has been turned on, it will be possible to navigate through the menu by pressing the button on the left side of the panel.

When the word "SETUP" is displayed, you will need to hold down the button, noting that the hours will start flashing: these can now be changed with single touches of the button on the left, then confirming them by holding down the button once again.

The minutes can be adjusted using the same procedure.


Posted on 28 January 2025 by ScegliAuto


Related tutorials

How to Set the Clock on the BMW G310 GS
How to Set the Clock on the BMW G310 GS
G310 Gs To set the clock on the BMW G310 GS, turn the ignition key in the ignition switch to power up the instrument cluster. Once powered on, navigate throu…
How to Set the Time on a BMW G 310 GS?
How to Set the Time on a BMW G 310 GS?
G310 Gs In this tutorial, you will learn how to set the time on a BMW G 310 GS, a very simple and quick operation to perform after disconnecting the battery …
How do you replace the clutch of the BMW G310 GS?
How do you replace the clutch of the BMW G310 GS?
G310 Gs To replace the clutch cable of the BMW G310 GS, you need to loosen the screws that fix the ends of the cable to their respective housings: this cable…

How to Replace the Piston on a Derbi GPR 125

To replace the piston on a Derbi GPR 125, loosen the bolts securing the cylinder head to its housing, allowing it to be removed along with the valve cover. This will enable you to access the bolts securing the cylinder at the top of the engine, allowing for its complete removal and revealing the underlying piston. The piston can now be freed from its securing bolts, enabling you to position the new piston onto the corresponding conrod. After installation, refit the engine components.

Watch the video!


by ScegliAuto

More videos