Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you bleed the brakes on the BMW G310?

Model: Bmw G310
Part: Brake fluid

Video tutorial

To bleed the brakes on the BMW G310, you will need to loosen the small caps located at the bottom of the brake calipers: once these have been removed, you can proceed by connecting the appropriate bleeding tubes to expel the brake oil from the system.

At this point, you can close the bleed caps on the calipers and proceed by inserting the new oil: you will need to open the caps located on the sides of the handlebars by unscrewing the screws.

After inserting the oil and closing the caps, you will need to pump the brake caliper to allow the oil to circulate.


Posted on 28 February 2025 by ScegliAuto


Related tutorials

How do you dismantle the engine of the BMW G310?
How do you dismantle the engine of the BMW G310?
G310 To disassemble the engine of the BMW G310, you need to loosen the screws that hold it to its housing in the center of the frame: then you can disconn…
How do you replace the headlight bulb of the BMW G310?
How do you replace the headlight bulb of the BMW G310?
G310 To replace the headlight bulb of the BMW G310, you need to pry off the side panels of the headlight by using an object to access the screws underneat…
How to Replace the Stator on the BMW G310?
How to Replace the Stator on the BMW G310?
G310 To replace the stator on the BMW G310, loosen the screws securing the cover located on the left side of the bike, near the front. Once the cover scre…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos