Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Bmw
    3. : G650 X

Model: Bmw G650 X
Part: Wheel

To disassemble the front wheel of a BMW G650X, start by placing the motorcycle on a center stand or a secure support to lift the front wheel off the ground. Use an appropriate wrench to loosen the wheel axle bolts located on both sides of the fork. Remove any brake calipers by unscrewing the bolts that attach them to the fork, then carefully move them aside without disconnecting them to avoid damaging the brake lines. Loosen the main wheel axle nut with a socket wrench or a suitable wrench. Once the nut is loosened, carefully remove the wheel axle by pulling it out. With the axle removed, lift the wheel slightly and remove it from the fork, being careful not to damage the brake discs or other components. Make sure to keep track of any spacers or washers that may fall off during removal. The front wheel of your BMW G650X is now disassembled and ready for any necessary maintenance.

Posted on 19 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front wheel of the BMW R 1200 GS
How to disassemble the front wheel of the BMW R 1200 GS
R1200 GS In this guide, we will see the steps that will allow us to disassemble and remove the front wheel of the BMW R1200 GS motorcycle. First of all, we pu…
How to Remove the Front Wheel of the BMW F800 GS
How to Remove the Front Wheel of the BMW F800 GS
F800gs This guide will show you how to remove and replace the front wheel or tyre of the BMW F800 GS motorcycle. First, place your motorcycle on the centre …
Removing the Front Wheel of a BMW R1200 GS
Removing the Front Wheel of a BMW R1200 GS
R1200gs In today's tutorial video, you will learn how to remove and replace the front wheel of a BMW R1200 GS motorcycle by following these simple steps. Fir…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos