Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you adjust the front headlight of the Kymco Like 150i?

Model: Kymco Like 125
Part: Headlight

Video tutorial

In order to adjust the front headlight of the Kymco Like 150i, you will need to locate the nut located at the front of the motorcycle, just below the headlight in question: you will need to use a specific hex key for adjusting this screw. You will need to tighten it to raise the beam of light projected by the headlight; conversely, it will be possible to loosen the screw to lower the beam of light.

Once the adjustment is complete, you can remove the hex key and also turn off the front headlight.


Posted on 25 February 2025 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on the Kymco Like 124?
How to Replace the Headlight Bulb on the Kymco Like 124?
Like 125 To replace the headlight bulb on the Kymco Like 125, you must completely dismantle the front fairing of the motorcycle by unscrewing all the correspo…
Replacing the Front Headlamp Bulb on the Kymco Like 125
Replacing the Front Headlamp Bulb on the Kymco Like 125
Like 125 This guide will show you the main steps to disassemble and replace the front headlamp bulb on the Kymco Like 125 scooter. First, place the scooter on…
How to Replace the Headlight Bulb on a Kymco Like 125?
How to Replace the Headlight Bulb on a Kymco Like 125?
Like 125 To replace the headlight bulb on a Kymco Like 125, loosen the screws securing the front fairing of the motorcycle: the fixing screws are located at t…

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos