Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today's guide will show us the main steps on how to disassemble and replace the headlight bulb of the Kymco Like 125 scooter. First of all, we put the scooter on the center stand and start disassembling and removing the headlight from the instrument panel, unscrewing the mounting screws; then we disconnect the electrical connector of the bulb and remove the rubber protective cover, as shown in the video. At this point, we release the metal clip to remove and replace the bulb with the new one, of the right type and having the same attachment, reassembling everything!

Posted on 30 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the engine oil of the Kymco Like 125?
How do you replace the engine oil of the Kymco Like 125?
Like 125 The oil change of the Kymco Like 125 can be performed by removing the drain plug of the oil pan, located in the central lower part of the motorcycle:…
How do you replace the engine oil of the Kymco Like 125?
How do you replace the engine oil of the Kymco Like 125?
Like 125 The engine oil in the lubrication system of the Kymco Like 125 can be replaced by removing the drain plug of the oil pan, located in the central lowe…
Replacing the air filter of the Kymco Like 125
Replacing the air filter of the Kymco Like 125
Like 125 Below are the step-by-step instructions for removing and replacing the engine air filter of the Kymco Like 125 scooter. First, place the scooter on i…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos