Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the rear brake pads on a Honda CBR 600 RR, loosen the screws that secure the pads inside their housing: these screws will be located at the top of the caliper. Once the screws and the corresponding pin have been removed, you can slide the pads out of the caliper and insert the new replacement parts; the new pads must then be secured with the appropriate pin and corresponding nuts. You can then check that everything is functioning correctly.

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear brake pads of the Honda CBR 600 RR?
How do you replace the rear brake pads of the Honda CBR 600 RR?
Cbr 600 Rr In order to replace the rear brake pads of the Honda CBR 600 RR, you need to loosen the nut that secures the locking pin of the pads inside the calip…
How to Replace the Front Brake Pads on the Honda CBR 600 RR
How to Replace the Front Brake Pads on the Honda CBR 600 RR
Cbr 600 Rr This guide provides instructions for removing and replacing the front brake pads on the Honda CBR 600 RR motorcycle. First, place the bike on a stand…
Replacing the Front Brake Pads of the Honda CBR 600 RR
Replacing the Front Brake Pads of the Honda CBR 600 RR
Cbr 600 Rr Let’s briefly go through the procedure for removing and replacing the front brake pads of the Honda CBR 600 RR motorcycle in simple and quick steps. …

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos