Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch of the Benelli TNT 600

Model: Benelli Tnt 600
Part: Clutch

Video tutorial

Today's guide will show you the steps to remove and replace the clutch discs of the Benelli TNT 600 motorcycle. First, place your motorcycle on a stand and start unscrewing the fixing screws of the transmission cover; once removed, you can unscrew the screws of the clutch pack to subsequently remove all the discs, as shown in the video.

At this point, install the new original clutch discs, alternating cork ones with metal ones; assemble the clutch and finally refit the outer cover!


Updated on 16 August 2026 by ScegliAuto


Related tutorials

How to Replace the Chain and Sprocket on a Benelli TNT 600
How to Replace the Chain and Sprocket on a Benelli TNT 600
Tnt 600 These brief and simple steps will show you how to disassemble and replace the chain and sprocket on a Benelli TNT 600 motorcycle. First, place the mo…
How to Replace the Rev Sensor on a Benelli TNT 600
How to Replace the Rev Sensor on a Benelli TNT 600
Tnt 600 This guide provides instructions on how to remove and replace the engine rev sensor on a Benelli TNT 600 motorcycle by following these simple steps. …
How to Replace the Handlebars on a Benelli TNT 600
How to Replace the Handlebars on a Benelli TNT 600
Tnt 600 Follow these instructions to remove and replace the handlebars on your Benelli TNT 600 motorcycle. First, place the bike on a stand and start by remo…

An Affordable Modification to Solve a Problem on the Yamaha MT07

This video shows how to solve a problem affecting the Yamaha MT07 with a very affordable modification. This bike requires a specific movement of the throttle grip to accelerate, which forces the right wrist into an unnatural twist. You can remedy this by fitting the throttle control from the R6, which reduces the rotation from 90° to 45°; the cost is under £25 even when buying the original part directly from the dealership. As shown, the disassembly and reassembly work is extremely simple; just be careful not to let the throttle guide slip, as it has its seat directly in the cover. You can see the difference in hand position after replacing the grip.

Watch the video!


by ScegliAuto

More videos