Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw F850gs
Part: Engine oil

The motor oil of the BMW F850 GS can be replaced by unscrewing the drain plug of the oil pan, located in the central lower part of the vehicle: once the plug has been removed, all the used oil can be drained into a properly positioned container. Then it will be possible to remove the oil filter located in the central lower part of the vehicle; at this point, a top-up will be necessary. The necessary amount of oil must be poured through the vent located on the right side of the motorcycle, ensuring that everything is functioning properly.

Posted on 9 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil in the BMW F850 GS?
How to replace the engine oil in the BMW F850 GS?
F850gs In this tutorial we can see how to replace the engine oil in the BMW F850 GS, an extremely simple and quick operation. First of all, make sure that t…
How to replace the motor oil in the BMW F850 GS?
How to replace the motor oil in the BMW F850 GS?
F850gs In this tutorial, we can see how to replace the engine oil in the BMW F850 GS, an extremely simple and quick operation to be carried out every 12 mon…
How to replace the engine oil in the BMW F850 GS?
How to replace the engine oil in the BMW F850 GS?
F850gs In this tutorial we can see how to replace the engine oil in the BMW F850 GS, an extremely simple and fast operation. First of all, make sure that th…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos