Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Bmw
  4. : F 900 Gs

Model: Bmw F 900 Gs
Part: Engine oil

This guide provides instructions for replacing the engine oil and oil filter while performing maintenance on the BMW F 900 GS. First, place the bike on the stand and begin to undo the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then, remove the screws from the oil filter cover, replacing the cartridge with a new one as shown in the video. Undo the filler cap to top up with new oil, pouring in the correct amount.

Posted on 30 August 2026 by ScegliAuto

Video tutorial

Related tutorials

F 900 Gs In this brief guide, we will go over the instructions that will allow us to disassemble and replace the battery of the BMW F 900 GS motorcycle. First…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos