Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a BMW GS R1250

Model: Bmw Gs R1250
Part: Service warning light

Video tutorial

On a BMW GS R1250 motorcycle, the procedure to reset the service light begins by turning on the instrument panel without starting the engine. Use the controls on the handlebars to access the 'Service' menu and select the maintenance item to reset, such as 'Oil Service' or 'Inspection'. Confirm your selection by holding down the confirmation button for a few seconds until the light turns off. After the reset, turn off and then turn on the instrument panel to check that the light remains off. If necessary, the reset can be completed using BMW diagnostic software connected to the motorcycle's OBD port.


Posted on 30 October 2026 by ScegliAuto


Related tutorials

How to Replace the Horn on the BMW GS R1250
How to Replace the Horn on the BMW GS R1250
Gs R1250 To replace the horn on the BMW GS R1250, loosen the screws that secure the old horn, located just behind the front mudguard. Once the horn is freed f…
How to Remove the Front Wheel of the BMW GS 1250?
How to Remove the Front Wheel of the BMW GS 1250?
Gs R1250 To remove the front wheel of the BMW GS 1250, first loosen the bolts securing the caliper to the brake disc, both at the top and bottom. Once both ca…
How to Remove and Install the Rear Wheel on a BMW GS 1250R
How to Remove and Install the Rear Wheel on a BMW GS 1250R
Gs R1250 In this video, you will see how to remove and reinstall the rear wheel on a GS 1250R: the first step is to place the bike on a support stand and remo…

How to Replace the Front Brake Pads on a BMW K75?

To replace the front brake pads on a BMW K75, loosen the screws that secure the brake caliper to the corresponding disc so that you can slide out the pin and detach the caliper. Once the caliper is detached, you can remove the existing pads to fit the new ones. After inserting the new pads, reinsert the pin and position the caliper onto the disc. Secure it with the appropriate screws, ensuring everything functions correctly.

Watch the video!


by ScegliAuto

More videos