Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the time on a Piaggio Liberty 125

Model: Piaggio Liberty 125
Part: Clock

This video is currently unavailable

In this short and simple guide, you will learn how to set the time on the small display of the instrument panel of the Piaggio Liberty 125 scooter. First, place the scooter on the centre stand and turn on the instrument panel; then press and hold the mode button for a few seconds until the clock display starts to flash, as shown in the video.

At this point, press the same button to change the hour and then the minutes; exit the settings menu to save all the changes made!


Updated on 31 October 2026 by ScegliAuto


Related tutorials

How to Set the Time on a Piaggio Liberty 125 Scooter?
How to Set the Time on a Piaggio Liberty 125 Scooter?
Liberty 125 .. In this tutorial, you will learn how to set the time on a Piaggio Liberty 125 scooter, a very simple and quick operation to perform after.. …
How to Set the Clock on a Piaggio Liberty 125
How to Set the Clock on a Piaggio Liberty 125
Liberty 125 Setting the clock on a Piaggio Liberty 125 is a straightforward task. In the attached video, we see the instrument panel and notice the Mode button, …
How do you replace the transmission of the Piaggio Liberty 125?
How do you replace the transmission of the Piaggio Liberty 125?
Liberty 125 In order to replace the transmission of the Piaggio Liberty 125, you need to loosen the screws that fix the cover located near the rear wheel, on the…

How to Replace Engine Oil in the Husqvarna TE 610?

In this tutorial, you will see how to replace the engine oil in the Husqvarna TE 610, a very simple and quick operation. Before proceeding, wait for the engine to cool completely to operate safely. Start by removing the lower protection panel, then locate the drain bolt on the right side and loosen it using a 14 mm socket spanner. Once all the oil has drained from the system, remove the filter, clean it of any dirt residue, and reassemble everything. Finally, insert the required amount of oil through the upper hole.

Watch the video!


by ScegliAuto

More videos