Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Coolant Level on a BMW F750 GS

Model: Bmw F750 Gs
Part: Antifreeze coolant

Video tutorial

In this guide, we will see the instructions to check the coolant level of the engine on a BMW F750 GS. First, place the motorcycle on the centre stand and begin removing the plastic cover located on the right, accessing the reservoir behind the cooling radiator; then check that the level is at the maximum level mark.

If the level is below the minimum, you will need to top it up by unscrewing the radiator cap; start the engine and top up if necessary!


Posted on 2 November 2026 by ScegliAuto


Related tutorials

How to replace the battery of the BMW F750 GS remote control?
How to replace the battery of the BMW F750 GS remote control?
F750 Gs In this tutorial, we can see how to replace the battery of the remote control of the BMW F750 GS, an extremely simple and quick operation. To do this…
How do you install the windshield on the BMW F750 GS?
How do you install the windshield on the BMW F750 GS?
F750 Gs In order to install the windshield on the BMW F750 GS, you need to loosen the screws that secure the front fairing of the motorcycle, located immedia…
How to Change the Engine Oil in the BMW F750 GS?
How to Change the Engine Oil in the BMW F750 GS?
F750 Gs In this tutorial, you will see how to change the engine oil in the BMW F750 GS, an extremely simple and quick operation to perform every 12 months. F…

How to Change the Engine Oil of a KTM DUKE 390?

To change the engine oil of the KTM Duke 390, start by briefly warming up the engine to help the old oil flow out. Turn off the bike and place it on a stable stand to prevent it from tipping. Locate the oil drain plug at the bottom of the engine. Using a spanner, unscrew the plug and collect the used oil in a suitable container. Allow the fluid to drain completely for a few minutes, ensuring no residue remains in the engine. Once drained, securely reattach the drain plug. Now, locate the oil filler cap on the side of the engine, remove it, and add the new oil specific to your Duke 390. Pour it slowly and check the level with the dipstick or gauge until you reach the correct amount, ensuring you do not exceed the recommended level. After completing the operation, close the filler cap, start the engine for a moment, and then turn it off again to check for any leaks or drops in level.

Watch the video!


by ScegliAuto

More videos