Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on a BMW R1250 GS?

Model: Bmw R1250 Gs
Part: Brake pads

Video tutorial

In this tutorial, you will see how to replace the rear brake pads on a BMW R1250 GS, a very simple and quick operation. First, go to the back of the bike, then remove the small rear mudguard using a T30 Torx key. Next, unscrew the two bolts securing the caliper with a T40 key, separate it from the transmission casing, and detach the two metal clips.

At this point, you can extract the two pins, remove the old pads, and clean any dirt residue present. Finally, position the new parts and follow the reverse procedure to reassemble everything.


Updated on 18 July 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery on the BMW R1250 GS
How to Replace the Remote Battery on the BMW R1250 GS
R1250 Gs As shown in this tutorial, replacing the remote battery on the BMW R1250 GS is a very simple and quick operation. For this, you will need a replaceme…
How to replace the battery of the BMW R1250 GS remote control?
How to replace the battery of the BMW R1250 GS remote control?
R1250 Gs In this tutorial, we can see how to replace the battery of the BMW R1250 GS remote control, an extremely simple and quick operation. To do this, we w…
How to Replace the Remote Battery of a BMW R1250 GS?
How to Replace the Remote Battery of a BMW R1250 GS?
R1250 Gs In this tutorial, you will learn how to replace the remote battery of a BMW R1250 GS, a very simple and quick operation. For this, you will need a re…

How to change the engine oil in a Ducati Multistrada 950?

In this tutorial, learn how to change the engine oil in a Ducati Multistrada 950, a simple and quick operation to perform every 12 months. First, wait until the engine is sufficiently cool, then remove the lower protective cover and place a container underneath the bike. Next, locate the drain bolt, unscrew it with a 5 mm hex key, and allow all the oil in the system to drain out. Finally, unscrew the filter, tighten the new one, reassemble everything, and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos