Do it yourself
Frequently asked questions about cars and motorcycles

Model: Bmw F800gs
Part:

This guide provides instructions on how to remove and replace the drive belt on a BMW F800 GS motorcycle, following these simple steps. First, place the motorcycle on the centre stand and begin loosening the drive belt tensioner by unscrewing the screws of the pipe support; then remove and replace the drive belt as shown in the video. At this point, tighten the belt, ensuring it is correctly seated on the sprocket; install only the original belt from the manufacturer!

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

F800gs In this short video, you will see how to bleed and replace the coolant or antifreeze on a BMW F800 GS motorcycle. To bleed the cooling system, remove…
F800gs To replace the rear brake pads on a BMW F800 GS, you need to remove the clip that secures the pin of the brake caliper. Once the clip is removed, you…
F800gs In this tutorial, learn how to replace the headlight bulbs on a BMW F800 GS, a very simple and quick operation. First, ensure the key is not inserted…

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos