Do it yourself
Frequently asked questions about cars and motorcycles

How to Access the Battery in a BMW R1200 GS

Model: Bmw R1250 Gs
Part: Battery

Video tutorial

In this tutorial, you will see how to access the battery in a BMW R1200 GS, a very simple and quick operation to perform if you need to charge or replace it. First, ensure that the instrument panel is off, then move to the right side of the bike and, using a Torx T25 key, unscrew the single fixing bolt of the plastic cover.

Next, detach the rubber strap and remove the additional panel.

To remove the battery, simply disconnect the negative terminal, pull it out, and disconnect the positive terminal.


Updated on 12 August 2026 by ScegliAuto


Related tutorials

R1250 Gs In this new mini guide dedicated to your BMW R1250 GS, you will learn how to correctly replace the battery inside the key. This is a relatively simpl…
R1250 Gs As shown in this tutorial, replacing the remote battery on the BMW R1250 GS is a very simple and quick operation. For this, you will need a replaceme…
R1250 Gs In this tutorial, we can see how to replace the battery of the BMW R1250 GS remote control, an extremely simple and quick operation. To do this, we w…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos