Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw G650 Gs
Part: Engine oil

In this tutorial, you will learn how to change the engine oil in the BMW G650 GS, a very simple and quick operation that should be performed every 12 months. First, wait until the engine is sufficiently cool, then position a container underneath it, locate the drain plug, and remove it with a 24mm socket. Allow all the oil in the system to drain out, then open the filter housing cap and proceed with its replacement. At this point, you can reassemble everything and add the new oil through the designated opening.

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front brake pads of the BMW G650 GS?
How do you replace the front brake pads of the BMW G650 GS?
G650 Gs It will be possible to replace the front brake pads on the BMW G650 GS by loosening the screws that hold the brake caliper to its housing on the corr…
How do you replace the front brake pads of the BMW G650 GS?
How do you replace the front brake pads of the BMW G650 GS?
G650 Gs In order to replace the front brake pads of the BMW G650 GS, you need to loosen the screws that secure the brake caliper to its housing on the corres…
How to Remove the Rear Wheel on the BMW G650 GS?
How to Remove the Rear Wheel on the BMW G650 GS?
G650 Gs In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central …

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos