|
Do it yourself
| |||
| ||||
Video tutorial
To replace the clutch on the BMW K75, you need to loosen all the screws that secure the clutch cover, located at the central lower part of the bike, behind the gearbox. Once the cover is removed, you will find the clutch underneath. To remove it, loosen all the bolts securing the clutch discs: these discs can then be taken out of their housing to insert the new ones. After securing the discs in their housing, cover everything with the clutch cover to ensure everything functions correctly.
Updated on 10 September 2026 by ScegliAuto
Related tutorials
K75
The clutch installed on board the BMW K75 can be replaced by loosening all the screws that secure the protective cover, located in the central lower …
K75
It will be possible to replace the battery of the BMW K75 by inserting the ignition key into the lock located at the bottom right of the saddle itsel…
K75
The air filter installed on the BMW K75 can be replaced by loosening the screws that secure the air filter box to its housing: this is located direct…
|
Replacing the Rear Brake Pads of the BMW G310 GS
Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.088
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
