Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on the BMW K75?

Model: Bmw K75
Part: Brake pads

Video tutorial

To replace the brake pads on the BMW K75, you need to perform the same operation for both the rear and front wheels: once the fixing screws of the caliper have been undone, detach the caliper from the corresponding disc so that the pads inside can be fully released.

After removing the old pads, insert the new ones: these can be secured with the appropriate screws, ensuring they are installed on the disc and checking that everything functions correctly.


Updated on 23 September 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a BMW K75?
How to Replace the Front Brake Pads on a BMW K75?
K75 To replace the front brake pads on a BMW K75, loosen the screws that secure the brake caliper to the corresponding disc so that you can slide out the…
How do you replace the spark plug of the BMW K75?
How do you replace the spark plug of the BMW K75?
K75 In order to replace the spark plug of the BMW K75, you need to loosen the screws that secure the panel on the left side of the engine block. Once thi…
How to Replace the Front Fork Oil on the BMW K75
How to Replace the Front Fork Oil on the BMW K75
K75 To replace the front fork oil on the BMW K75, you need to loosen the drain plug located at the bottom of the fork, near the brake disc: once the plug…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos