Do it yourself
Frequently asked questions about cars and motorcycles

Model: Bmw K75
Part: Spark plugs

In order to replace the spark plug of the BMW K75, you need to loosen the screws that secure the panel on the left side of the engine block. Once this panel has been completely removed, you can locate the underlying coil. This can be disconnected to access the spark plug, which can then be removed from its housing using the appropriate socket wrench. At this point, you can insert the new spark plug into its seat, ensuring that it is properly connected to the coil and verifying that everything is functioning correctly.

Posted on 29 May 2025 by ScegliAuto

Video tutorial

Related tutorials

K75 To replace the spark plugs on the BMW K75, access the left side of the bike, at the bottom where the engine block is visible: here you will be able t…
K75 The exhaust pipe installed on the BMW K75 can be replaced by loosening the screws that fix it to its seat, on the left side of the motorcycle near th…
K75 It will be possible to replace the exhaust pipe installed on the BMW K75 by loosening the screws that fix it to the corresponding seat on the left si…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos