Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Spark Plugs on the BMW K75?

Model: Bmw K75
Part: Spark plugs

Video tutorial

To replace the spark plugs on the BMW K75, access the left side of the bike, at the bottom where the engine block is visible: here you will be able to locate the spark plugs within their housings. To remove them, use the appropriate socket wrench so that you can pull the spark plug from the top of the corresponding cylinder; once the old spark plugs have been removed, you can insert the new ones, securing them in place by tightening with the socket wrench.

After installation, start the engine to check that everything is functioning correctly.


Updated on 19 September 2026 by ScegliAuto


Related tutorials

K75 In order to replace the spark plug of the BMW K75, you need to loosen the screws that secure the panel on the left side of the engine block. Once thi…
K75 To replace the front fork oil on the BMW K75, you need to loosen the drain plug located at the bottom of the fork, near the brake disc: once the plug…
K75 To replace the brake pads on the BMW K75, you need to perform the same operation for both the rear and front wheels: once the fixing screws of the ca…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos