Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Outside Rearview Mirror

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Side mirror

First, remove the four screws located inside the four corners of the mirror. Once the screws are removed and set aside, gently push down and pull the mirror to extract the front plastic cover. After this step, close the mirror and remove the plastic cover located at the back. Then, remove the bottom part of the mirror. To completely remove the mirror, open the door and unscrew the two screws located inside, and you're done.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Side Mirror on BMW E39
How to Remove the Side Mirror on BMW E39
BMW Serie 5 (1995-2003 / E39) How to remove the damaged exterior mirror? Let's see how to disassemble the mirror from inside the exterior mirror of the BMW 5 Series. Use leverage …
How to replace the external rearview mirror of the BMW 5 Series
How to replace the external rearview mirror of the BMW 5 Series
BMW Serie 5 (2017-2024 / G30) Today's instructions will show us the steps on how to disassemble and replace the external rearview mirror of the BMW 5 Series. First, we open the fr…
How to Remove the Outside Rearview Mirror of the BMW 5 Series
How to Remove the Outside Rearview Mirror of the BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) Today, let's go through the instructions to remove and replace the outside rearview mirror of the BMW 5 Series. First, open the front door and begin …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos