Do it yourself
Frequently asked questions about cars and motorcycles

How to Install the Cargo Area Divider Net

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Checks and maintenance

This video explains how to install the cargo area divider net, useful for ensuring safe transport. The original BMW net can be purchased, for example, on eBay, with the code 294374040105, and costs $309.29, including shipping. The net can be installed in two different ways: with the seatbacks in the upright position or with the seatbacks folded down. First, remove the trunk cover and store it in the compartment under the floor. Then, fold the rear caps of the cover over the roof frame until they latch. Now, insert the two upper fastening pins of the net into the supports and push them forward. Secure the cargo net with the two upper hooks to the two eyelets on the rear seatback, then fold the front caps of the cover and secure the net in the same way. Finally, attach it to the rear seatback with the two lower hooks; to simplify the operation, you can slightly lift the seatback.

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 5 (1995-2003 / E39) How do you change the battery on a BMW 5 Series? Let's see where the battery is located and how to remove it. Open the trunk of the car (on the BMW, …
BMW Serie 5 (1995-2003 / E39) Do you want to replace the trunk light bulb in your BMW 5 Series? Let's see how to do it in the video. First, open the trunk lid and remove the light…
BMW Serie 5 (2003-2010 / E61, E60) The instructions in this guide will show us the procedure for disassembling and replacing the bulb in the trunk of the BMW 5 Series. First, we open t…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos