Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Seat Cover Kit

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Accessory kit

If you want to protect and customize your car, you can install seat covers. This operation is relatively simple and may vary slightly from one car model to another. First, it's best to take the opportunity to give a general clean. Start with the piece that goes on the backrest and then move to the bottom part. Slide the cover on, trying to center it as you position it. The fabric flap on the back of the two pieces should be tucked between the backrest and the seat so that it comes out at the back of the seat. At this point, secure the elastic bands of the covers under the seat with the provided hooks. If the car has electric adjustments at the base of the seat, you will need to be a bit more patient, trying to slide the cover without covering the buttons. Now slide the cover for the headrest. For the rear seat, the process is equally simple. Once you detach the seat, you can work more comfortably. Fit the cover and secure it by hooking the elastics with the provided hooks. The backrest, being fixed, should simply be wrapped with the appropriate cover. Car model: BMW 5 Series.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Easily Locate the Fuse Box on a BMW 5 Series F11
Easily Locate the Fuse Box on a BMW 5 Series F11
BMW Serie 5 (2010-2017 / F11, F10) Finding the fuse box on a BMW F11 is very simple. Under the dashboard, there is a plastic panel that can be accessed by removing the clips that hold …
Removal and Installation of the Camshaft Position Sensor
Removal and Installation of the Camshaft Position Sensor
BMW Serie 5 (1995-2003 / E39) The necessary steps to perform the operation shown in the following guide consist of: 1) remove the battery cover of your car, 2) disconnect the nega…
Installing a New Radiator
Installing a New Radiator
BMW Serie 5 (1995-2003 / E39) This video tutorial shows how to install a new radiator on a BMW 5 Series. The video starts with a comparison between the old and new radiator. Since…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos