Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to program a new key for the Buick Lacrosse?

Model: Buick Lacrosse MK 2 - Years 2010-2016
Part: Key

The tutorial presented here is useful for programming a new key when you already have a functioning one. It cannot be used to program a blank key if you don't already have a programmed one. Therefore, make sure to purchase a new key and program it right away, without waiting to lose the original keys because in that case, only the dealer can help us, with the resulting costs. To program a new key, all we have to do is insert the functioning key into the cylinder, turn on the ignition and turn it off after a few seconds, and then repeat the same thing with the new key.

Posted on 2 April 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of a 2011 Buick LaCrosse.
How to replace the air filter of a 2011 Buick LaCrosse.
Buick Lacrosse (2010-2016 / MK 2) If the engine of your 2011 Buick Lacrosse often experiences abnormal overheating and power loss, then it's time to replace the air filter. Below we w…
How to replace the Buick LaCrosse key battery
How to replace the Buick LaCrosse key battery
Buick Lacrosse (2005-2009 / MK 1) If you are in possession of a Buick LaCrosse Mk1 and your car key has suddenly stopped working, do not worry because in the following guide you will …
Battery replacement for Buick Lacrosse
Battery replacement for Buick Lacrosse
Buick Lacrosse (2010-2016 / MK 2) Below we will see the instructions that will allow us to disassemble and replace the battery of the Buick Lacrosse engine, in simple and quick steps.…

How to Remove the Headlight Bulbs on a Toyota Rav4

Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap (if present) on the headlight and remove it (located at the rear of the headlight). At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulb using a screwdriver and pliers. Fit the new bulb (ensuring it is the correct type and size), insert the bulb holder back into the headlight housing, and close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly.

Watch the video!


by ScegliAuto

More videos