Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear shock absorber of a Buick LaCrosse?

Model: Buick Lacrosse MK 1 - Years 2005-2009
Part: Shocks

To replace the rear shock absorber of the Buick Lacrosse, you need to lift the car using a jack or a lift, so that the corresponding wheel is not in contact with the ground. Once the wheel is lifted, you need to unscrew the bolts that fix it to its hub, in order to remove it and gain access to the components in its rear part: now it will be possible to loosen the bolts that fix the shock absorber both to the upper part of the body and to the lower part of the hub. In this way, you can insert the new replacement part, and then mount the corresponding wheel.

Posted on 14 April 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of a 2011 Buick LaCrosse.
How to replace the air filter of a 2011 Buick LaCrosse.
Buick Lacrosse (2010-2016 / MK 2) If the engine of your 2011 Buick Lacrosse often experiences abnormal overheating and power loss, then it's time to replace the air filter. Below we w…
How do you replace the tail light bulb on your Buick Lacrosse?
How do you replace the tail light bulb on your Buick Lacrosse?
Buick Lacrosse (2005-2009 / MK 1) To be able to replace the rear light bulb on your Buick Lacrosse you need to open the bonnet, so that you can detach the plastic panels inside the tr…
How to replace the battery in the Buick LaCrosse remote control?
How to replace the battery in the Buick LaCrosse remote control?
Buick Lacrosse (2017-2024 / MK 3) In this tutorial, we can see how to replace the battery of the Buick LaCrosse remote control, which is a very simple and inexpensive operation. To do…

Other guides you may be interested in

How to Replace the Thermostat on a Fiat Punto 2 Series 8v

When replacing the thermostat, it is advisable to drain the coolant system completely. The thermostat is located just above the gearbox, directly under the ignition coils. To facilitate the replacement, disconnect the intake duct hose and remove the coil pack. At this point, disconnect the connector from the thermostat and proceed to remove the corresponding fixing pins to replace it with the new one, ensuring to use a new gasket.

Watch the video!


by ScegliAuto

More videos