Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Brake Pads and Discs on a Fiat 600

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Brake rotors

Here are the tips for replacing the brake pads and discs on your car. Secure the car, lift it up, and start removing the wheel. Turn the steering wheel to remove the brake caliper retaining clip, being careful not to lose it. Now remove the pin and you can lift it off. Spread the brake pads to retract the piston, then remove them. Before removing the caliper, unscrew the two bolts. Now, remove the two bolts on the disc and you can replace it with the new part, using the palms of your hands to hit the disc, first on one side then the other. Continue by refitting the two bolts. Then the caliper, the pin, and the clip. Install the new brake pads.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Brake Pads on Fiat 600
Replacing Front Brake Pads on Fiat 600
Fiat Seicento (1998-2010 / MK 1) In this video, you will learn how to replace the front brake pads on the Fiat 600. First, remove the wheel by taking off the bolts. Then, slide out t…
How to Remove the Coil Wires on a Fiat 600
How to Remove the Coil Wires on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Are the coils on your Fiat 600 damaged and the car won't start? Here’s how to replace them on a Fiat 600. Pull the engine compartment release lever l…
How to Remove the Headrest from a Fiat 600
How to Remove the Headrest from a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Before you start, sit in the back seat of your Fiat 600. In the headrest support slots, there are small holes. Begin by inserting a suitable tool int…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos