Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Brake Pads on Fiat 600

Model: Fiat Seicento MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Brake pads

Video tutorial

In this video, you will learn how to replace the front brake pads on the Fiat 600. First, remove the wheel by taking off the bolts. Then, slide out the pad pins and lift the caliper.

You can use a screwdriver to help remove the pads. Compress the piston fully to allow fitting of the new pads.

Now, clean the area and proceed to reassemble the caliper by inserting the pins (replace them if damaged or deformed). Refit the wheel, and you will have completed your task!


Updated on 18 March 2026 by ScegliAuto


Related tutorials

How to Replace Brake Pads and Discs on a Fiat 600
How to Replace Brake Pads and Discs on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Here are the tips for replacing the brake pads and discs on your car. Secure the car, lift it up, and start removing the wheel. Turn the steering whe…
How to Remove the Coil Wires on a Fiat 600
How to Remove the Coil Wires on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Are the coils on your Fiat 600 damaged and the car won't start? Here’s how to replace them on a Fiat 600. Pull the engine compartment release lever l…
How to Top Up the Windscreen Washer Fluid of a Fiat 600
How to Top Up the Windscreen Washer Fluid of a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Before you begin, open the front bonnet of your Fiat 600. Start by unscrewing and removing the cap located near the right front headlamp. Then, inser…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos