Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Seicento
    4. : How to remove the steering wheel of the Fiat Seicento?

Fiat Seicento - Video tutorial

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Steering wheel
Operation: How to remove the steering wheel of the Fiat Seicento?

The first thing to do when you want to remove the steering wheel on a Fiat Seicento is to remove the two plastic covers on the sides of the steering wheel. This will give us access to the Allen screws that need to be removed. Once these are unscrewed, we can proceed to uninstall the airbag, which is no longer held in place by the screws. Remember to disconnect the electrical connector without pulling it forcefully. Finish the operation by removing the nut that secures the steering wheel to the steering column, which is located just below the airbag. Now the steering wheel is free and can be removed from its seat.


Posted on 29 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Seicento 1998-2010 - How much does it cost to replace the light switch on the Fiat Seicento? Read Answer
    • Seicento 1998-2010 - What key is needed to remove the Fiat Seicento steering wheel? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos