Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Steering Wheel of a Fiat 600

Model: Fiat Seicento MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Steering wheel

Video tutorial

Learn how to replace the steering wheel of a Fiat 600 from above the mounting shaft. Insert a screwdriver at the sides of the steering wheel to remove the plastic covers that conceal the securing screws.

Use a socket spanner to undo the bolts at the sides of the steering wheel, then pull the steering wheel off the steering shaft. For reassembly: connect the power connector, then insert the steering wheel onto the steering shaft to lock it in place.

Press down with your hands, then tighten the securing screws located at the sides. Close the sides of the steering wheel with the plastic covers.


Updated on 13 April 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel of a Fiat 600
Fiat Seicento (1998-2010 / MK 1) How to remove the steering wheel of a Fiat 600? This operation is very simple if you follow the steps. Insert a screwdriver or bit (medium length) in…
How to Remove the Steering Wheel of a Fiat 600
How to Remove the Steering Wheel of a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Before you can start, sit in the driver's seat of your Fiat 600. Begin by prising off and removing the side covers of the steering wheel. Next, unscr…
How to Remove the Coil Wires on a Fiat 600
How to Remove the Coil Wires on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Are the coils on your Fiat 600 damaged and the car won't start? Here’s how to replace them on a Fiat 600. Pull the engine compartment release lever l…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos