Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Steering Wheel of a Fiat 600

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Steering wheel

How to remove the steering wheel of a Fiat 600? This operation is very simple if you follow the steps. Insert a screwdriver or bit (medium length) into the side holes of the steering wheel and unscrew the securing bolts. Once the bolts are removed: disconnect the airbag with the respective power connectors. Use a socket wrench to unscrew the bolt located at the centre of the steering wheel, and extract it from the steering column. For reassembly of the steering wheel: connect the power connector, then insert the steering wheel into the steering column, press it with your hands until it is fully seated, and screw in the securing bolts.

Updated on 12 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Fiat Seicento (1998-2010 / MK 1) Before you can start, sit in the driver's seat of your Fiat 600. Begin by prising off and removing the side covers of the steering wheel. Next, unscr…
Fiat Seicento (1998-2010 / MK 1) Are the coils on your Fiat 600 damaged and the car won't start? Here’s how to replace them on a Fiat 600. Pull the engine compartment release lever l…
Fiat Seicento (1998-2010 / MK 1) Replacing the steering wheel on a car without an airbag is quite simple. Today, you will learn how to do this on a Fiat 600. Remove the upper cover, …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos