Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Seats from Fiat 600

Model: Fiat Seicento MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Seat

Video tutorial

In this short video tutorial, you will learn how to remove the rear seats from a Fiat 600, as well as from other car models. First, open the doors and access the rear of the vehicle.

Remove the rear bench by unfastening it by hand and taking out the screws located at the bottom. Next, to remove the backrests, lower them and from the boot area, remove all the fixing screws at the bottom; then take out the seats as shown in the video.

To reassemble everything, simply follow the reverse procedure of disassembly.


Updated on 30 March 2026 by ScegliAuto


Related tutorials

How to Remove the Coil Wires on a Fiat 600
How to Remove the Coil Wires on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Are the coils on your Fiat 600 damaged and the car won't start? Here’s how to replace them on a Fiat 600. Pull the engine compartment release lever l…
How to Remove the Headrest from a Fiat 600
How to Remove the Headrest from a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Before you start, sit in the back seat of your Fiat 600. In the headrest support slots, there are small holes. Begin by inserting a suitable tool int…
How to Change the Rear Shock Absorber on a Fiat 600
How to Change the Rear Shock Absorber on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Removing the rear shock absorber from a Fiat 600? Let’s see how to disassemble the part. Lift the car on a column ramp and identify the shock absorbe…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos