Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headrest from a Fiat 600

Model: Fiat Seicento MK 1 - Years 1998-2010

Before you start, sit in the back seat of your Fiat 600. In the headrest support slots, there are small holes. Begin by inserting a suitable tool into the two holes. This will release the internal clips that hold the headrest in place. Once the internal clips are released, the headrest will be free. At this point, you can pull the headrest out of the seat and set it aside. After completing this step, you will have successfully removed the headrest from your Fiat 600.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Coil Wires on a Fiat 600
How to Remove the Coil Wires on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Are the coils on your Fiat 600 damaged and the car won't start? Here’s how to replace them on a Fiat 600. Pull the engine compartment release lever l…
How to Remove the Headrests from a Fiat Seicento
How to Remove the Headrests from a Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) The headrests on the front seats have a height adjustment system that allows you to change the position depending on the height of the driver and pas…
How to Top Up the Windscreen Washer Fluid of a Fiat 600
How to Top Up the Windscreen Washer Fluid of a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Before you begin, open the front bonnet of your Fiat 600. Start by unscrewing and removing the cap located near the right front headlamp. Then, inser…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos