Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cylinder Head of a Fiat 600

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Engine

Let's see how to remove the cylinder head of a Fiat 600. Remove the soundproofing panel from the cylinder head (if present) and pull out the dipstick. Disconnect all the connectors supplying electricity to the glow plugs using pliers. Remove the various wiring present on the cylinder head (disconnect the metal clips of the various pipes and the power connectors using pliers). Use a socket wrench or electric screwdriver to unscrew all the bolts of the cylinder head; remove it along with the head gasket. Refit everything with a new gasket (use appropriate sealing adhesive).

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Coil Wires on a Fiat 600
How to Remove the Coil Wires on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Are the coils on your Fiat 600 damaged and the car won't start? Here’s how to replace them on a Fiat 600. Pull the engine compartment release lever l…
Replacing Cylinder Head Gasket on a Fiat 600
Replacing Cylinder Head Gasket on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) In this video tutorial, you will learn how to replace the cylinder head gasket on a Fire engine, specifically for the Fiat 600. In the video, the eng…
How to Change the Spark Plugs of a Fiat 600
How to Change the Spark Plugs of a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Let’s see how to change the spark plugs of a Fiat 600. Open the engine bay, lift the front bonnet, secure it, and disconnect the battery terminals. R…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos