Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Spark Plugs of a Fiat 600

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Spark plugs

Let’s see how to change the spark plugs of a Fiat 600. Open the engine bay, lift the front bonnet, secure it, and disconnect the battery terminals. Remove the soundproofing panel covering the air filter, then use a screwdriver to remove the coils on the engine head. Unscrew the spark plugs with a socket (using the appropriate socket), and pull them out of the head. Take the new spark plugs and guide them with the extension of the socket into the engine head, tighten them and connect the ignition coils to each spark plug. Close the engine bonnet and test the proper functioning of the spark plugs.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs on a Fiat 600
How to Replace the Spark Plugs on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Are you having ignition problems with your Fiat 600? Let’s see in detail how to change the spark plugs. Pull the engine compartment opening lever loc…
How to Remove the Coil Wires on a Fiat 600
How to Remove the Coil Wires on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Are the coils on your Fiat 600 damaged and the car won't start? Here’s how to replace them on a Fiat 600. Pull the engine compartment release lever l…
Replacing the Air Conditioning Compressor on Fiat 600
Replacing the Air Conditioning Compressor on Fiat 600
Fiat Seicento (1998-2010 / MK 1) How to replace the compressor on your Fiat 600? The Seicento is not originally equipped for air conditioning, so to fit just the compressor, you need…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos