Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Fiat 600

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Spark plugs

Are you having ignition problems with your Fiat 600? Let’s see in detail how to change the spark plugs. Pull the engine compartment opening lever located at the bottom left of the dashboard and lift the front bonnet, securing it in place. Disconnect the air panel, unscrew the securing bolts of the coils using a socket spanner, grip it with your hands and twist to extract it from the cylinder head. Unscrew the spark plugs with a socket spanner (remove them from the cylinder head) and take the new spark plug, inserting it into the cylinder head with the socket spanner. Refit the air filter.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Spark Plugs of a Fiat 600
How to Change the Spark Plugs of a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Let’s see how to change the spark plugs of a Fiat 600. Open the engine bay, lift the front bonnet, secure it, and disconnect the battery terminals. R…
Guide to Replacing Spark Plugs
Fiat Seicento (1998-2010 / MK 1) Spark plugs are a fundamental component of engines and can be replaced by yourself. Once the engine has cooled for a few hours, you can proceed. Open…
How to Remove the Coil Wires on a Fiat 600
How to Remove the Coil Wires on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Are the coils on your Fiat 600 damaged and the car won't start? Here’s how to replace them on a Fiat 600. Pull the engine compartment release lever l…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos