Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Ventilation Bulbs on a Fiat 600

Model: Fiat Seicento MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Instrument panel light

Video tutorial

How do you replace the lighting bulbs for the manual air conditioning knobs on a Fiat 600? In this video, see how to proceed: remove the central ventilation knob by hand, then use a screwdriver to unscrew the screws located at the bottom of the dashboard.

Next, remove the control mask (be careful not to break the plastic locking tabs).

After removing the cover mask from the dashboard, replace the lighting bulbs with new ones (gently). Finally, reassemble all the pieces in reverse order.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

Removing Air Conditioning Knobs on Fiat 600
Removing Air Conditioning Knobs on Fiat 600
Fiat Seicento (1998-2010 / MK 1) Replace the air knobs on a Fiat 600 if they are damaged or the bulbs are out. Before removing the knobs, take off the cover panel. Unscrew the securi…
How to Remove the Headrest from a Fiat 600
How to Remove the Headrest from a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Before you start, sit in the back seat of your Fiat 600. In the headrest support slots, there are small holes. Begin by inserting a suitable tool int…
Fitting Rear Bumper on Fiat 600
Fitting Rear Bumper on Fiat 600
Fiat Seicento (1998-2010 / MK 1) In this video, you will see how to fit the rear bumper on the small Fiat 600. First, insert the new bumper and start securing it by placing and tight…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos