Do it yourself
Frequently asked questions about cars and motorcycles

Fitting Rear Bumper on Fiat 600

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Rear bumper

In this video, you will see how to fit the rear bumper on the small Fiat 600. First, insert the new bumper and start securing it by placing and tightening the two screws located above the bumper. Now tighten the other screws that go on the side (in the wheel arch). The bumper should now be in position, so reinstall the rear lights by placing them in their housing and securing them with their screws. At this point, your work is complete: if the bumper is new, reinstall the number plate and the relevant bulb, and drill it if necessary.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Seicento (1998-2010 / MK 1) How do you remove the rear bumper on a Fiat 600? Follow these steps: use a screwdriver or cordless drill to unscrew the securing bolts located at the…
Fiat Seicento (1998-2010 / MK 1) Removing the rear bumper from a Fiat 600? Here’s how to detach it along with all its components. Lift the rear tailgate, unscrew the screws located a…
Fiat Seicento (1998-2010 / MK 1) To mount the front bumper of the Fiat 600 more comfortably, we put the car on a lift and raise it to a height that allows us to work easily. We posit…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos