Do it yourself
Frequently asked questions about cars and motorcycles

Assembly of the front bumper of the Fiat 600

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Front bumper

To mount the front bumper of the Fiat 600 more comfortably, we put the car on a lift and raise it to a height that allows us to work easily. We position the bumper and screw the two screws on the central beam without tightening them completely. We fix the two screws inside the wheel arch, turn the front wheel outwards to facilitate the attachment to the bottom of the bumper. We repeat the same operations on the other side, after which we lower the car to tighten the two screws on the central beam definitively.

Posted on 6 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Fiat Seicento (1998-2010 / MK 1) Before you start, sit in the back seat of your Fiat 600. In the headrest support slots, there are small holes. Begin by inserting a suitable tool int…
Fiat Seicento (1998-2010 / MK 1) Before you begin, open the front bonnet of your Fiat 600. Start by unscrewing and removing the cap located near the right front headlamp. Then, inser…
Fiat Seicento (1998-2010 / MK 1) Prepare to replace the timing belt on a Fiat 600. Lift the car on a column lift; remove the front wheel and the right wheel arch liner. Once these op…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos