Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper on a Fiat 600

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Rear bumper

Removing the rear bumper from a Fiat 600? Here’s how to detach it along with all its components. Lift the rear tailgate, unscrew the screws located at the top of the bumper. Once the rivets at the top are removed, unscrew the screws from the wheel arch liners and finally remove the pins located at the bottom of the bumper (if present on the vehicle). Remove the bumper from all sides. Position the new bumper by hand, tighten all screws around the wheel arch liners and around its perimeter. Finally, screw in the screws around the wheel arch liners.

Updated on 27 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper on a Fiat 600
How to Remove the Rear Bumper on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) How do you remove the rear bumper on a Fiat 600? Follow these steps: use a screwdriver or cordless drill to unscrew the securing bolts located at the…
Fitting Rear Bumper on Fiat 600
Fitting Rear Bumper on Fiat 600
Fiat Seicento (1998-2010 / MK 1) In this video, you will see how to fit the rear bumper on the small Fiat 600. First, insert the new bumper and start securing it by placing and tight…
Assembly of the front bumper of the Fiat 600
Assembly of the front bumper of the Fiat 600
Fiat Seicento (1998-2010 / MK 1) To mount the front bumper of the Fiat 600 more comfortably, we put the car on a lift and raise it to a height that allows us to work easily. We posit…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos