Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on a Fiat Seicento

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Battery

To change the battery on a Fiat Seicento, you will need a 10 mm ratchet. First, disconnect the negative terminal, then the positive terminal, and remove the 12 mm bolt on one side and another on the opposite side, beneath the positive cable. Remove the securing plate, then take out the battery. The new battery is a Fiat 60AH 600A 12V Start-Stop 600828789, available on Amazon for £97.49. Remember, when positioning the new battery, the negative terminal goes inside. Reattach the securing bracket, then connect the positive terminal and finally the negative terminal. Check that all screws are tight. The job is complete.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Fuse Box on the Fiat Seicento?
Where is the Fuse Box on the Fiat Seicento?
Fiat Seicento (1998-2010 / MK 1) In this video, you can see where the fuse box is located on the Fiat Seicento. There are two fuse boxes in the Fiat Seicento: the first fuse box is s…
How to Replace the Coolant in the Fiat Seicento
How to Replace the Coolant in the Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) This brief and simple guide provides instructions for replacing the coolant or antifreeze in the Fiat Seicento. First, drain the old antifreeze by di…
Guide to Replacing the Clutch on the Fiat Seicento
Guide to Replacing the Clutch on the Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) In this guide, you will discover the main instructions to remove and replace the clutch discs on the Fiat Seicento. First, lift the vehicle and start…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos