Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Shock Absorber on a Fiat 600

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Shocks

Removing the rear shock absorber from a Fiat 600? Let’s see how to disassemble the part. Lift the car on a column ramp and identify the shock absorber to be removed. Using a socket spanner, loosen the securing bolts of the shock absorber (at both the top and bottom). Use two spanners to remove the securing bolts (hold one with one hand while loosening with the other) and remove the shock absorber from its housing. Insert the new shock absorber into its housing and first tighten all the bolts at the top of the shock absorber, then secure the bottom.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Headrest from a Fiat 600
How to Remove the Headrest from a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Before you start, sit in the back seat of your Fiat 600. In the headrest support slots, there are small holes. Begin by inserting a suitable tool int…
How to Top Up the Windscreen Washer Fluid of a Fiat 600
How to Top Up the Windscreen Washer Fluid of a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Before you begin, open the front bonnet of your Fiat 600. Start by unscrewing and removing the cap located near the right front headlamp. Then, inser…
How to Remove the Coil Wires on a Fiat 600
How to Remove the Coil Wires on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Are the coils on your Fiat 600 damaged and the car won't start? Here’s how to replace them on a Fiat 600. Pull the engine compartment release lever l…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos