Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Bumper on an Alfa Romeo Mito

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Rear bumper

In this video, learn how to remove the front bumper on an Alfa Romeo Mito. Lift the engine bonnet and secure it. Use a plastic lever to remove the rivets/screws located at the top of the bumper. Once the rivets at the top are removed, unscrew the rivets of the splash guards and remove the pins located at the bottom of the bumper. Remove the bumper from the vehicle body. To proceed with the reassembly: hold the bumper against the vehicle body and tighten all screws around the splash guard and along its perimeter.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper of an Alfa Romeo Mito
How to Remove the Rear Bumper of an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) How to remove the rear bumper of an Alfa Romeo Mito? Follow these steps carefully. Open the boot; using a socket or battery-powered screwdriver, undo…
How to disassemble the rear bumper of the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Today's steps will show us the procedure on how to disassemble and replace the rear bumper of the Alfa Romeo Mito. First, let's move to the outside o…
How to disassemble the rear bumper of the Alfa Romeo Mito
How to disassemble the rear bumper of the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Removing the rear bumper of the Alfa Romeo Mito, if necessary, is a very simple and quick operation, which can be done independently. To carry out th…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos