Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front bumper of an Alfa Romeo Mito.

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Front bumper

In this very useful tutorial, we can see how to disassemble the front bumper of an Alfa Romeo Mito. This operation is not very complicated to do, and we can do it independently as the bumper is simply removed by unscrewing a series of cross screws that hold it in place, but let's see how to proceed immediately. First, we open the hood and start unscrewing the 4 screws on the top of the bumper, then we continue by removing the screws inside the two wheel arches and finally the lower ones. Once this is done, we disconnect the two fog light wiring harnesses and then remove the bumper completely.

Posted on 26 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Bumper of the Alfa Romeo Mito
Removing the Front Bumper of the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In today's video tutorial, learn how to remove and replace the front bumper of the Alfa Romeo Mito by following the instructions below. First, open t…
How to Remove the Front Bumper on an Alfa Romeo Mito
How to Remove the Front Bumper on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) This video shows how to remove the front bumper from an Alfa Romeo Mito: lift the engine bonnet and secure it. Using a battery-powered screwdriver or…
How to Replace the Front Seat Handle on an Alfa Romeo Mito
How to Replace the Front Seat Handle on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Before you start, open the front door of your Alfa Romeo Mito. Begin by lifting and holding the handle. This will expose the Allen screw that secures…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos